*Discontinued* Cal-Royal – CRHD781120 83″ – Continuous Hinge – Clear – Optional Application

Cal-Royal continuous geared hinges are designed to provide superior performance you can rely on in high-traffic areas because instead of using a pin as in conventional hinges, we use a geared rotating joint. Weight is distributed evenly along the full length of the frame, thus minimizing wear on the hinge. Approved for use on swing type doors of hollow metal, tinclad, sheet-metal and steel covered composite type rated up to and including 3 hours. Wood composite doors rated up to and including 1 1/2 hours.Features:Field Modifications – Cal-Royal continuous hinges can be cut in the field, however, any product modifications may void all warranties. If field modifications must be made, cut only the underside or bottom of the hinge.Cal-Royal – continuous hinges are approved for use on swing type doors of hollow metal, tinclad, sheet-metal and steel covered composite type rated up to and including 3 hours. Wood composite doors rated up to and including 1½ hoursFull Surface – These models have the frame leaf mounted to the face ofthe frame and the face of the door. The door leaf is mounted to the doorwith through bolts.Half Surface – These models have the frame leaf concealed betweenthe rabbet of the frame and the edge of the door. The door leaf is mountedto the face of the door with sex bolts or screws.Door Reinforcement – None neededFrame Reinforcement – None needed to 200 lbs. Use 16 gauge channel over 200 lbs.Fire Rating – Up to 3 Hours.Special Features – For new constructionFor renovation with new doors and / or frames No mortising of doors or frames requiredWill cover hinge cut outs in frames Flush mount no inset Frame and door leaf alignment ribs for proper hinge locationDownloads:CatalogTemplate